Widely considered one of the most effective water filtration methods, reverse osmosis (RO) creates clean, great-tasting water. RO systems are used in a variety of applications, including filtration for whole houses, faucets, aquariums, and restaurants. No matter what kind of water you start out with, there is likely an RO system that will suit your needs. Below you will find what reverse osmosis systems are, how they are beneficial, and what they are used for. You can also find a list of the best reverse osmosis systems on the market.
Reverse Osmosis Explained
1. What is RO? ⌄
2. How does an RO system work? ⌄
3. How can an RO system benefit you? ⌄
4. How does RO affect the environment? ⌄
5. Is RO water good for you? ⌄
6. Where is an RO system used? ⌄
7. How do you maintain an RO system? ⌄
8. 5 Best RO Systems ⌄
What is reverse osmosis?
Reverse osmosis removes contaminants from unfiltered water, or feed water, when pressure forces it through a semipermeable membrane. Water flows from the more concentrated side (more contaminants) of the RO membrane to the less concentrated side (fewer contaminants) to provide clean drinking water. The fresh water produced is called the permeate. The concentrated water left over is called the waste or brine.
A semipermeable membrane has small pores that block contaminants but allow water molecules to flow through. In osmosis, water becomes more concentrated as it passes through the membrane to obtain equilibrium on both sides. Reverse osmosis, however, blocks contaminants from entering the less concentrated side of the membrane. For example, when pressure is applied to a volume of saltwater during reverse osmosis, the salt is left behind and only clean water flows through.
What is a Reverse Osmosis System and How Does it Work?
How does a reverse osmosis system work?
A reverse osmosis system removes sediment and chlorine from water with a prefilter before it forces water through a semipermeable membrane to remove dissolved solids. After water exits the RO membrane, it passes through a postfilter to polish the drinking water before it enters a dedicated faucet. Reverse osmosis systems have various stages depending on their number of prefilters and postfilters.
Stages of RO systems
The RO membrane is the focal point of a reverse osmosis system, but an RO system also includes other types of filtration. RO systems are made up of 3, 4, or 5 stages of filtration.
Every reverse osmosis water system contains a sediment filter and a carbon filter in addition to the RO membrane. The filters are called either prefilters or postfilters depending on whether water passes through them before or after it passes through the membrane.
Each type of system contains one or more of the following filters:
Sediment filter: Reduces particles like dirt, dust, and rust
Carbon filter: Reduces volatile organic compounds (VOCs), chlorine, and other contaminants that give water a bad taste or odor
Semi-permeable membrane: Removes up to 98% of total dissolved solids (TDS)
When water first enters an RO system, it goes through prefiltration. Prefiltration typically includes a carbon filter and a sediment filter to remove sediment and chlorine that could clog or damage the RO membrane.
Next, water goes through the reverse osmosis membrane where dissolved particles, even too small to be seen with an electron microscope, are removed.
After filtration, water flows to the storage tank, where it is held until needed. A reverse osmosis system continues to filter water until the storage tank is full and then shuts off.
Once you turn on your drinking water faucet, water comes out of the storage tank through another postfilter to polish drinking water before it gets to your faucet.
Why do you need an RO storage tank?
An RO storage tank holds reverse osmosis water so you have plenty to use when you need it. A reverse osmosis system makes water slowly. It takes one minute to produce two to three ounces of RO water. If you were to turn on your faucet for a glass of water at the actual membrane production rate, then you would have to wait at least 5 minutes for it to fill. With a storage tank, your glass fills instantly.
Read more about how a water storage tank works.
What does a reverse osmosis system remove?
A reverse osmosis system removes dissolved solids like arsenic and fluoride through the RO membrane. An RO system also includes sediment and carbon filtration for a broad spectrum of reduction. The carbon filters in an RO system remove chlorine and bad taste and odors, and the sediment filter removes dirt and debris
Does a reverse osmosis system remove…
Herbicides and pesticides? Yes.
Many other contaminants? Yes. The contaminants listed are some of the most popular ones treated with an RO system, but the system also removes a slew of other contaminants.
Bacteria and Viruses? No. If your water comes from a city treatment plant, then it should already be microbiologically safe. Reverse osmosis may remove some bacteria, but bacteria could grow on the membrane and potentially enter your water supply. To remove living organisms and viruses, we recommend UV disinfection.
Learn how to remove bacteria from your drinking water.
Reverse osmosis system benefits
A reverse osmosis system is one of the most extensive methods of filtration. It removes 98% of dissolved solids, which makes it healthier to drink. A water distiller is the only other drinking water system that also reduces TDS, but it’s less efficient than an RO system.
Harmful dissolved contaminants reduced
Bad tastes and odors reduced
More environmentally friendly than bottled water
Easy to install and maintain
Fits under the kitchen sink
Browse Reverse Osmosis Systems
Does reverse osmosis waste water?
A reverse osmosis system sends water with rejected contaminants down the drain as wastewater, unlike other filters that trap contaminants. As water flows through the system, it’s divided into two streams. One stream carries the filtered water to a dedicated faucet, and the other stream carries the removed salts, dissolved pollutants, and minerals to the drain.
The brine or “wastewater” carries rejected contaminants from a reverse osmosis system to the drain. 4 gallons of water exits the drain for every gallon of water produced. But the brine water is used for a purpose, so it’s not exactly wasted. The wastewater in an RO system helps clean the water, just like a dishwasher uses water to clean dishes or a washing machine uses water to clean clothes. However, it’s our job in caring for the environment to minimize the amount of water sent to the drain and increase the efficiency of the RO system.
How to reduce wastewater in an RO system
Add a permeate pump. Installing a permeate pump to a reverse osmosis system is the best way to increase its efficiency. Permeate pumps reduce the wastewater from an RO system by 75 to 80%. Not every reverse osmosis system is designed to use one, so make sure the one you choose is plumbed for an additional pump.
Choose an RO system with an automatic shut off valve. An ASO valve stops the flow of water to the drain once the storage tank is full.
Use the RO reject water for landscaping or artificial lakes. Drain water has higher levels of total dissolved solids (TDS), but it’s safe to use in your lawn or garden.
The Neo-Pure 4300 DLX is one of the most efficient RO systems because it includes a permeate pump and an ASO valve.
Is reverse osmosis good for the environment?
When the water you use drains from your home, chemicals and other contaminants must be removed before it’s recycled. Wastewater is either sent to a water treatment plant and diluted to make it easier to treat or to riverbeds for nature to filter through the hydrologic cycle.
A reverse osmosis system makes waste treatment more efficient. Reverse osmosis water drained from your home is already free of chemicals since they’ve been removed in the carbon filtration stage. The leftover brine water has just a slightly higher concentration of dissolved inorganics. RO systems speed up the recycling process because no new chemicals are introduced into the water supply after RO water drains from your house.
Reverse osmosis vs. bottled water
Most bottled water is purified through reverse osmosis, but producing bottled water wastes more water than a reverse osmosis system. Think about all the water required to make one bottle of water. When bottled water is purified, wastewater is sent to the drain, and producing the bottle uses water and petroleum. Petroleum is used again to deliver the bottled water to the store. Afterward, the truck may get washed, using even more water. A reverse osmosis system provides water just as pure as bottled water that tastes just as refreshing without as great of a cost to the environment.
Reverse osmosis also has the added benefit of perpetually producing highly purified water in your home. There is no need to run out to the grocery store to stock up on expensive and wasteful cases of bottled water. A reverse osmosis system produces bottled water quality hydration in the comfort of your kitchen. You can even fill stainless steel water bottles with RO water and store them in your fridge, so you can enjoy all the conveniences of bottled water without the disposable single-use plastic bottles and weekly grocery runs.
Is reverse osmosis water good for you?
A reverse osmosis water system removes dissolved contaminants that you can’t see but that could make you sick. Reverse osmosis does work for your kidneys by filtering water before it enters your body. It also removes beneficial minerals like calcium and magnesium from water, but that does not make reverse osmosis water bad for you.
Our bodies are 70-80% water that hydrates, lubricates joints, and aids organ function. You don’t need minerals to do those things. You would have to drink excessive amounts of water for your body to absorb enough mineral content to make a significant difference. Food is the primary source of essential nutrients, not water. If you want more minerals, eat your fruits and veggies.
Some mineral content is fine to drink, but the EPA recommends that the amount of TDS in water not exceed 500 parts per million. A large portion of the U.S. has TDS levels that exceed this level and could benefit from an RO system.
Where to use a reverse osmosis system
Under the sink? Yes.
Reverse osmosis is most commonly installed at the point of use (POU), like under a kitchen or bathroom sink. A point-of-use RO system could also be mounted in a cabinet or remotely in the garage or basement.
For a refrigerator? Yes.
Connecting an under-sink reverse osmosis system to your refrigerator is simple and worthwhile. Reverse osmosis removes minerals from water, making your ice clear and beverages more refreshing.
For the whole house? Rarely.
Reverse osmosis can be used to treat water for the whole house. However, unless your water has a specific contaminant that requires reverse osmosis, using an RO system may be over-kill. An RO system solves specific problems like saltwater intrusion in a well or high levels of silica in the water.
An RO system will not provide the flow rate needed to pressurize an entire house. In the rare case where a whole house requires RO water, a large booster pump, like a Grundfos or Davey, provides adequate water pressure. In addition to a large water pump and storage tank, a UV system is needed to disinfect the water once it leaves the tank.
Homeowners have a lot to consider when purchasing an RO system for the whole house. If your water quality is dire enough to warrant whole house reverse osmosis, you likely have other water quality issues that will need to be addressed prior to the water reaching the RO membrane. High levels of water hardness will cause scale build-up on the membrane, reducing its performance and causing it to fail prematurely. Contaminants like iron can also foul the membrane and will need to be eliminated from the water before being treated by the reverse osmosis system.
If you believe your water quality may require whole house reverse osmosis to treat, check out our in-depth guide on whole-house reverse osmosis systems. | Explore how water booster pumps work